Audio Playback - MICRO


audio playback - micro modules pcb

Product ID : P-101


Datasheet / Sample Code

Datasheet - V1.0
Sample Code - V1.0

This Audio Playback - Micro module is used to play audio files in high quality compressed format. The module has inbuilt small storage to save the audio files. The approximate audio length that can be stored in to the module is 40 seconds. The module is highly useful in many applications where a small voice prompt or message needs to played. There is an option to save up to 3 different voice messages and the same can be activated through induvidual inputs for each message.


The module has in-built power amplifier which can drive a speaker. The audio will be loud enough and there is no need for external power amplifier.


The module can be powered by 6V - 12V DC power supply. There is an on-board 5V regulator in the module. Reverse supply protection diode is also populated in the modue.


This module needs special device and software to convert the audio files and program in to the chip. So voice cannot be changed by the end-user. Customers needs to send the MP3 audio files to make the conversion and program in to the chip.


Options:


  • Following configurations are available when programming the module.

  • Maximum 3 voice messages can be stored with total capacity of approximately 40 seconds.

  • Voice messages can be triggered with either active-high or active-low input. Default will be active-low pulse.

  • Messages can be configured to play in loop mode after power on instead of pulse trigger.

  • Giving a pulse when playing audio can be interrupted to play the new audio or else interrupting while playing can be disabled.

  • Volume can be adjusted while programming in 30 steps.

Applications:


  • Voice prompts in consumer electronics.

  • Interactive toys and educational devices.

  • Public announcement systems.

  • IoT devices with audio feedback.

  • Automotive systems (e.g., GPS voice guidance).

 

This product can be customized as per need.


Related Products

Audio Playback - USB
usb-host-keyboard-decoder
This Audio Playback module is used to play audio files in high quality mp3 format. The module uses external USB storage (PenDrive) to read the audio files.
Audio Playback - FLASH
usb-host-keyboard-decoder
This Audio Playback module doesnt require any external USB storage (PenDrive) to save the audio files. The modules has inbuilt SPI-FLASH memory.
Audio Playback - MINI
usb-host-keyboard-decoder
This Audio Playback - Mini module is used to play audio files in high quality compressed format. The module has inbuilt small storage to save the audio files.
Circuits World - Logo
© Circuits World. All Rights Reserved.