Audio Playback - USB


Product ID : P-104


Datasheet / Sample Code

Datasheet - V1.0
Sample Code - V1.0

This Audio Playback module is used to play audio files in high quality mp3 format. The module uses external USB storage (PenDrive) to read the audio files. The pendrive must be formatted in FAT32 format and not NTFS. As the module uses pendrive to save the audio files it can save huge number of files in high quality. The module can address and select up to 25245 files thus a huge number of audio files can be easily played with a simple serial command.

The module has 8 key inputs where the first 8 messages can be triggered with these inputs. If the number of audio files are more then it can be controled by serial(UART) command.

All files should be placed inside folders named 01 to 99.

Each folder can have up to 255 files. The files should be named with three digit number like 001.mp3, 255.mp3.

The first 8 files in side folder name "01" will be triggered using 8 key inputs.

The entire module is powered by regulated 5V power supply.

The module has on board power amplifier which can be directly connected to a speaker. Pre-amplifier output is also available to connect with an external amplifier circuit.

Commands:

The module can be controlled by simple serial command. The baud rate is fixed to 9600. There are only 2 commands.

Volume : AT+VOL=
0Fcr  (value can be 0-30) 0F is a single byte(hex value) which means volume will be set to 15.

Play : AT+PL=FNSNcr

(FN - Folder Number value can be 01-99 (0x01 to 0x63)) - One byte
(SN - Song Number
value can be 001-255 (0x01 to 0xFF)) - One byte

All commands ends with cr which is carriage return(0x0d).

Applications:

Voice prompts in consumer electronics.

Interactive toys and educational devices.

Public announcement systems.

IoT devices with audio feedback.

Automotive systems (e.g., GPS voice guidance).


This product can be customized as per need.

Related Products

Audio Playback - MICRO
usb-host-keyboard-decoder
This Audio Playback - Micro module is used to play audio files in high quality compressed format. The module has inbuilt small storage to save the audio files.
Audio Playback - MINI
usb-host-keyboard-decoder
This Audio Playback - Mini module is used to play audio files in high quality compressed format. The module has inbuilt small storage to save the audio files.
Audio Playback - FLASH
usb-host-keyboard-decoder
This Audio Playback module doesnt require any external USB storage (PenDrive) to save the audio files. The modules has inbuilt SPI-FLASH memory.
Circuits World - Logo
© Circuits World. All Rights Reserved.